Filter
Top Products
12
PLASMA
PLASMA
PLASMA Purification Operation(Optional)
Press the Start/Stop button. The unit
will respond with a beep.
Open the door on the remote control.
Press the PLASMA air purifying
operation ON/OFF button.
Operation will start when the button is
pressed and stop when the button is
pressed again.
Set the fan speed again with door of the remote control
closed. You can select the fan speed in four steps-low,
medium, high or CHAOS. Each time the
buttonispressed,thefanspeedmode
is shifted.
✴ Air purifying operation (PLASMA) can be
with cooling, Heating or any other operations.
PLASMA Air Purifying Operation only
If you press the only PLASMA button, only
PLASMA air purifying operates.
Then, fan speed is low. You can select the fan
speed in four steps-low, medium, high or
CHAOS.
Each time the button ( ) is pressed, the fan
speed mode is shifed.
1
2
3