Filter
Top Products
5
OPERATION
GB
General
• Turn the unit on with the ON/OFF BUTTON [2]. The last used operating mode is
selected.
• The ON/OFF BUTTON turns the appliance off; the operating mode active at this
moment is stored in memory and will be used when the air conditioner is
switched back on again.
• Set the temperature with the TEMP BUTTONS [1] – within the limits of the
thermostat: 18 °C – 32 °C. Each press of the button makes a change of 1 °C.
• Use the FAN SPEED BUTTON [7] to set the fan speed at low , medium , high or
automatic ( is flashing). The fan speed in the automatic setting is determined
by the difference between the set temperature and the room temperature.
• Use the SWING BUTTON [3] to adjust the horizontal (up/down) air flow direction.
Mode selection
Press the MODE BUTTON [6] to select the operating mode. The symbol on the left
side of the display indicates the selected mode.
Auto
1. Press the MODE BUTTON [6] until the symbol appears next to AUTO.
2. The temperature is automatically set to 25 °C and can not be adjusted.
3. Use the FAN SPEED BUTTON [7] to set the fan speed.
4. Use the SWING BUTTON [3] to adjust the air flow direction.
Cool
1. Press the
MODE BUTTON [6] until the symbol appears next to COOL.
2. Set the desired temperature.
3. Use the FAN SPEED BUTTON [7] to set the fan speed.
4. Use the SWING BUTTON [3] to adjust the air flow direction.
Dry (dehumidify)
1. Press the
MODE BUTTON [6] until the symbol appears next to DRY.
2. The temperature is automatically set to 25 °C and can not be adjusted.
3. The fan speed is automatically set to low and can not be changed.
4. The air flow direction is automatically set to fixed and can not be adjusted.
Heat
1. Press the MODE BUTTON [6] until the symbol appears next to HEAT.
2. Set the desired temperature.
3. Use the FAN SPEED BUTTON [7] to set the fan speed.
4. Use the SWING BUTTON [3] to adjust the air flow direction.