Filter
Top Products
12
SAFETY
Read the section on safety aspects and these instructions before you start.
Stick to the work sequence and working method shown here.
For technical or commercial reasons, the manufacturer may make changes to the
appliance or component parts, without general notification. You can consult your
supplier about this.
IMPORTANT:
• This appliance must be connected to an earthed socket for 230 V/50 Hz, with a
13 A fuse.
• The connection to the national grid must be carried out in agreement with the
safety standards as regards the installation of electrical household appliances
applicable in the country of use.
If in doubt have the electrical installation checked and if necessary modified by a
qualified electrician
Ensure you have:
• a well lit and a work area clear of clutter.
• a well thought out and pre-arranged work plan.
• sound tools and reliable implements.
• protection: safety goggles, ear protection, mask, hard hat, work shoes and work
gloves.
The outdoor unit must be lifted and put in place by two people.
GB
Install the indoor unit where there is:
• no influence from outdoor air,
• no blockage of air inlet or air outlet,
• no smoke or steam, and no generation, inflow, lingering or leakage of flammable
gases,
• no high-frequency facility (such as arc welder).
Avoid places where acid solutions or some special sprayers (sulfides) are frequently
used.
• The air from the indoor unit should reach every corner of the room.
• Do not install a fire alarming device near the air outlet, the alarm may
erroneously be triggered by the warm air from the unit.
POSITION OF THE INDOOR UNIT