Filter
Top Products
G26 CONDENSATE ASSEMBLY
(For left or right installation - left shown)
HEAT EXCHANGER COIL
COMBUSTION AIR
BLOWER BRACKET _ //
COLD
HEADER
BOX
1/2 INCH CPVC
VENT TERMINATION
MUST BE
HIGHER THAN COIL
PLUG PROVIDED WITH G26
CONDENSATE TRAP
i i
Y
LEFT SIDE OF CABINET
1/2"PVC X 1/2"MPT ADAPTER PROVIDED WITH G26
1/2" PVC X 1/2" CPVC BUSHING (KIT PROVIDED)
(Bushing fits in one direction only. One end fits inside of 1/2 PVC
adapter or coupling while 1/2 CPVC fits inside the other.)
Note - Bushing may be installed further downstream with a
1/2 inch coupling instead of with 1/2 inch adapter (shown).
NOTE - USE ADHESIVE SUITABLE FOR CPVC AND
PVC WHEN JOINING THESE TWO MATERIALS
FIGURE 6
Page 8