Filter
Top Products
NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.
18
ACCESSORY COMPONENTS
The following items are available for use with
this appliance.
Cat. No. Model Description
H1535 GEP-36BL Glass Enclosure Panel, Black on Bronze
H1536 GEP-36PB Glass Enclosure Panel, Brass on Bronze
H1537 GEP-36BS Glass Enclosure Panel, Stainless on Bronze
Cat. No. Model Description
H1541 SK-36W White Mantel Kit, MPE-36R
H1542 SK-36O Oak Mantel Kit, MPE-36R
Cat. No. Model Description
H1538 TK3-36BL 3-pc. Black Trim Kit, MPE-36R
H1539 TK3-36PB 3-pc. Brass Trim Kit, MPE-36R
H1540 TK3-36BS 3-pc. Stainless Trim Kit, MPE-36R
Cat. No. Model Description
85L87 FWSK Wall Switch Kit, White
65 7/8" (1660mm)
33 1/2"
(850 mm)
39 3/8"
(1000 mm)
61 7/8"
(1558 mm)
49 1/2"
(1256 mm)
Wall Thermostat
The wall thermostat kit provides temperature
control for optimum comfort.
Cat. No. Model Description
89L36 WTK Wall Thermostat Kit
Wall Switch Kit
Mantel Kit
Trim Kit
Glass Enclosure Kit
A = 41” (1041 mm)
B = 31 7/8” (810 mm)
C = 34 3/8” (872 mm)
D = 36” (914 mm)
E = 2 1/2" (64 mm)
A
B
C
D
These glass enclosure panels are a one-piece
panel, which have a bi-fold “look” as shown
below.
This kit contains trim panels used to fi nish the
gaps between the wallboard or optional mantel
and the fi replace, providing the appliance a
fi nished built-in look.
Cat. No. Model Description
H1645 PCK Power Cord Kit, 3-Prong, 110V
Power Cord Kit, 3-Prong, 110V
~83”
Printed in U.S.A. © LENNOX HEARTH PRODUCTS 2004
P/N 775,172M REV. B 7/2004
The manufacturer reserves the right to make changes at any time, without notice, in design,
materials, specifi cations, prices and also to discontinue colors, styles and products.
Consult your local distributor for fi replace code information.
1110 West Taft Avenue
Orange, CA 92865
NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.
15 3/4"
(400 mm)
Decorative mantel surrounds are available to
provide a quick and beautiful "against the wall"
installation in any location without the need for
remodeling or construction.
If a power cord is preferred instead of hard-
wiring the power supply to the fi replace, this
optional power cord kit is available (110 Volt
installations only).
E