Filter
Top Products
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
9
1. Place the rear log onto the two corresponding locating pins at the
back of the fi rebox as shown in Figure 16.
2. Place the Front Right Log onto the two corresponding locating pins
as shown in Figure 17.
3. Place the Center Log onto the two corresponding locating pins as
shown in Figure 18.
Figure 16
Rear Log
Figure 17
Front Right Log
Figure 18
Center Log
4. Place the Front Left Log onto the two corresponding locating pins
as shown in Figure 19.
5. Install the Top Left Log onto the corresponding locating pin and
indentation on Center Log as shown in Figure 20.
6. Install the Front Center Log over the Front Right Log. The front
of log will rest on the burner and the back of log will rest on rear
log as shown in Figure 21.
7. Install the Top Right Log into the corresponding indentations on
Front Center Log and front right twig as shown in Figure 22.
Figure 19
Front Left Log
Figure 20
Top Left Log
Figure 21
Front Center Log