Filter
Top Products
- 13 -
Changing threads
(binding together)
With the following procedure, changing threads is
quite simple:
1. Cut the yarn above the spindle and knot the
ends of the new and the old thread together.
2. Place the thread tension selector 2/q/w/e
at "0" and lift the sewing foot o.
3. Pull on the other end of the yarn until the knot
passes under the sewing foot o.
4. For threading it in the needle, pull on the other
end until the knot is in the eye of the needle and
then cut the yarn to the left and right of the knot.
Then carry out the rethreading.
Setting the stitch length
The stitch length can be adjusted in nine steps, from
1.0 to 5.0 mm. Almost all overlock work is
carried out with a stitch length of 2.5 – 3.5 mm.
Turn on the inner adjustment wheel for stitch length
z to adjust the stitch length:
Stitch Stitch length
Normal seams
2.0 - 5.0 mm
Standard: 3.0 mm
Narrow edgings 1.0 - 2.0 mm
Hemstitching 1.0 - 2.0 mm
IB_KH4300_33077_LB6.qxd 02.06.2009 13:40 Uhr Seite 13