Filter
Top Products
Model Identification
Every Kenmore Room AirConditioner has an
identification plate showing model number, part number,
serial number, and power requirements of unit.
identification plate is located behind air filter, attached to
the lower left hand side of base pan.
Parts and Feature Identification
Figures 1 and 2 show location of air conditioner parts
and features described in this manual.
Figure 1. Air Conditioner External Parts Identification
1. Outer case
2. Air discharge vent airflowdirection control lever
3. Vent door control lever
4. Side air louvers
5. Curtain assembly
6. Air discharge vent
7. Front grille
Air return vent
Electronic control panel
9
8
7
6
5
Figure 2. Air Conditioner Internal Parts Identification
1. Fan motor
2. Slinger ring
3. Condenser coil and fins
4. Compressor
5. Vertical air discharge vent louvers
6. identification plate
7. Evaporator coil and fins
8. Thermostat
9. Blower fan
10. Condenser fan
2
10
5 4
NOTE: In Figure 2, fan assembly (including blower fan,
condenser fan, fan motor, and slinger ring) is
shown removed for easier component
identification.