Filter
Top Products
24
Faceplate Timer Features
4. Press SELECT1 to show the 97% Feature.
IntelliSoft 97% Feature: The 97% Feture is an inte-
gral part of the IntelliSoft water and salt saving sys-
tem. When this feature is ON, the softener will auto-
matically recharge when 97% capacity has been
used, at any time of day. The default is ON. If this
feature is not desired, turn off by pressing the DOWN
button.
5. Press SELECT1 to show the 12 HOUR display.
12 or 24 hour clock: All time displays are shown in
standard clock time (1 to 12 PM; and 1 to 12 AM) at
the 12 hr default setting. If Military time displays are
desired, set to 24 hr by pressing the UP button.
6. Press SELECT1 to show the GALLONS or LITERS
display.
Gallon or Liter readings: Water usage and flow dis-
plays are shown in gallons. If you prefer to have the
same displays in liters, press the UP button until Liter
shows.
7. Press SELECT1 to show the RECHARGE display.
Maximum days between regenerstions: The face-
plate timer automatically controls regeneration fre-
quency (see page 28). This provides the greatest
operating efficiency, and under most conditions, this
feature will be left in its default mode. However,
modify this feature if you want to force a regeneration
every set number of days. For example, if your water
supply contains iron and you want the softener to
regenerate at least once every few days to keep the
resin bed clean, set the display as typically shown
above. Setting is available from 1 to 15 days by
using the UP and DOWN buttons.
8. Press SELECT 1 to return the present time display.
TANK LIGHT
To light the inside of the salt storage tank, press the
TANK LIGHT button on the faceplate. Press the same
button again to turn the light off, or it will turn off auto-
matically in 4 minutes.
WATER FLOW THROUGH THE SOFTENER
To view the gallon (or liter) per minute water flow rate
through the softener, if not already displayed, press the
SELECT 2 button. If soft water is being used, the flow
rate to the closest 1/10 gallon (or liters) shows. If all
faucets and water using appliances are off, the display
will show 0 flow.
LITERS
SALT
LEVEL
SIGNAL
LEVEL
8
7
6
5
4
3
2
1
GALLONS
SALT
LEVEL
SIGNAL
LEVEL
8
7
6
5
4
3
2
1
RECHARGE
DAY
SALT
LEVEL
SIGNAL
LEVEL
8
7
6
5
4
3
2
1
RECHARGE
DAY
SALT
LEVEL
SIGNAL
LEVEL
8
7
6
5
4
3
2
1
PM
SALT
LEVEL
SIGNAL
LEVEL
8
7
6
5
4
3
2
1
FLOW RATE
PM
SALT
LEVEL
SIGNAL
LEVEL
8
7
6
5
4
3
2
1
GPM
TIME
AM
PM
SALT
LEVEL
SIGNAL
LEVEL
8
7
6
5
4
3
2
1
TIME
SALT
LEVEL
SIGNAL
LEVEL
8
7
6
5
4
3
2
1
Default Display Example:
Set to 4 Days Maximum
Between Regeneration
FIG. 42
FIG. 43
FIG. 44
FIG. 40
RECHARGE
SALT
LEVEL
SIGNAL
LEVEL
8
7
6
5
4
3
2
1
RECHARGE
SALT
LEVEL
SIGNAL
LEVEL
8
7
6
5
4
3
2
1
FIG. 39
FIG. 41
Questions? Call The Kenmore Water Line 1-800-426-9345