Kenmore 580.5145 Dehumidifier User Manual


 
Whenthebucketisfull,orwhenthebucketisnotintheproperposition,theBucketFulrlightturnson
andtheunitautomaticallyshutsoff.
Also,whenbucketisoutofposition,theunitwillbeep3times.
Thebucketmustbereplacedintheproperpositionforthedehumidifierto work.Thelightwill
beonandthedehumidifierwill notrunif thebucketis notintheproperposition.
The water bucket can be emptied
Empty the bucket manually.
When the bucket is full,
remove and empty it into a
large sink or tub. When
finished, replace it properly.
NOTE: To replace the bucket
properly, make sure the
slots on the back of bucket
are positioned correctly.
in one of three ways:
Place the dehumidifier
directly over drain.
The bucket has a threaded
hose connection which can be
left open. Drill a 1/4" (6.4ram)
to 1/2"(13mm) hole in the
center of the hose connection.
Once opened, the hose
connection will continually
drain water from the bucket.
Attach a garden hose to the
threaded bucket drain hose
connection to carry water to
the drain. (HANDTIGHTENONLY)
When being attached to the
bucket drain hose connection,
be sure the hose doesn't kink
or bend. It should lie fiat from
the dehumidifier to the drain.
-8o