Filter
Top Products
• Removing the Hook Cover Plate
(_ Hook cover plate release button
Hook cover plate
Slide the hook cover plate release button (_ to the
right, and remove the cover plate _).
\
• Inserting the Bobbin
End of thread
Notch
Notch
Threading chart
[] Place a bobbin in the bobbin holder with the
thread running off counterclockwise.
[] Guide the thread into the notch (_ on the front
side of the bobbin holder. Draw the thread to the
left, sliding it between the tension spring blades.
[] Continue to draw the thread lightly until the
thread slips into the notch _. Pull out about 6"
(15 cm) of thread.
[] Attach the hook cover plate. Check the threading
by referring to the chart _ shown on the hook
cover plate.
f
[]
[]
[]
[]
\
24