Filter
Top Products
Connecting Machine to Power Supply
O Power supply plug
Outlet
Machine plug
Power switch
_) Machine socket
(_ Light bulb
Before connecting the power cord, make sure the
voltage and frequency shown on the machine
conform to your electrical power.
1. Turn off the power'switch (_.
2. Insert the machine plug _ into the machine
socket _.
3. Insert the power supply plug _ into the outlet _).
4. Turn the power switch _) to turn on the power
and sewing light (_.
For Your Safety
* While in operation, always keep your eye on the
sewing area. Do not touch any moving parts
such as the thread take-up lever, handwheel or
needle.
* Always turn off the power switch and unplug from
the power supply:
- When leaving the machine unattended.
- When attaching or removing any parts.
- When cleaning the machine.
* Do not place anything on the foot control, when
not sewing.
Operating instructions:
"For appliances with a polarized plug (one blade
wider than the other).
To reduce the risk of electric shock, this plug is
intended to fit in a polarized outlet only one way. If
it does not fit fully in the outlet, reverse the plug. If it
still does not fit, contact a qualified electrician to
install the power outlet. Do not modify the plug in
any way."
"Foot Controller Model YC-482J-1 or TJC-150 for
use with Sewing Machine Models 385.17624 and
385.17620"
J
Controlling Sewing Speed
Sewing speed can be varied by the foot control.
The harder you press on the foot control, the faster
the machine runs.
6