Filter
Top Products
SECTION VIII.CARE OF YOUR MACHINE
NOTE:
Unplug the machine.
Do not dismantle the machine other than as
explained in this section.
Do not store the machine in a high-humidity area,
near a heat radiator or in direct sunlight.
Clean the outside of the machine with a soft cloth
and mild soap.
Replacing the Light Bulb
CAUTION:
As the light bulb could be HOT, protect your
fingers when you handle it.
Unplug the machine and open the face cover. While
pushing the bulb up, turn it counterclockwise to remove.
Put in a new bulb by pushing it up and turning it clockwise.
I I
'J:
I
0
I I
'T:
I
Cleaning the Feed Dogs
Unplug the machine and remove the presser foot and
needle with a screwdriver.
Remove the needle plate with a screwdriver.
Use a lint brush to clean the feed dogs.
S
Replace needle plate and tighten with a screwdriver.
68