Filter
Top Products
SEWINGMACHINEDtV.20 MODEL384.15358
MECHANICAL ADJUSTMENT
BUTTUNHOLEFUNCTION
TO CHECK:
BOTTONHOLES SHOULD BE ABOUT 3MM LONGER THAN THE LENGTH SET BY THE R
FOOT.
IF THIS LENGTH CANNOT BE OBTAINED, THEN CHECK AND ADJUST AS FOLLOWS:
ADJUSTMENTPROCEDURE:
1. OPEN THE FACE COVER (SEE PAGE 4).
2. TURN THE ADJUSTING SCREW IN THE DIRECTION OF (A) IF THE BUTTONHOLE
STITCH LENGTH IS LONGER THAN THE STANDARD,OR tN THE DIRECTION OF (B) IF
THE BUTTONHOLE STtTCHLENGTHIS SHORTER THAN THE STANDARD.
3. ATTACH THEFACECOVER.
ADJUSTING SCREW
BUTTONHOLE LEVER
r
(A)
(B)
STANDARD
f
AIOUT 3MM
25