Filter
Top Products
SEWINGMACHINEDtV.20 MODEL384.15358
MECHANICAL ADJUSTMENT
BARTACKFEED OFBUTTONHOLE
TO CHECK:
IF THE MATERIAL tS FED FORWARD OR BACKWARD WHEN SEWING BARTACK ON
BUTTONHOLE, MAKE AN ADJUSTMENT AS FOLLOWS:
ADJUSTMENT PROCEDURE:
1. SET THE PATTERN SELECTOR DIAL AT .... AND THE STITCH LENGTH DIAL AT" 4 ".
2. REMOVE THE FRONT COVER (SEE PAGE 9).
3. PLACE A PIECE OF PAPER UNDER THE FOOT AND TURN THE HANDWHEEL.
IF THE PAPER IS FED FORWARD, TURN THE ADJUSTING SCREW IN THE DIRECTION
OF (C).
IF THE PAPER tS FED BACKWARD, TURN THE ADJUSTING SCREW IN THE
DIRECTION OF (U).
4. ATTACH THE FRONT COVER.
FORWARD FEEDING
(D) (c)
ADJUSTING SCREW
BACKWARD FEEDING
23