Filter
Top Products
Air Conditioner Features
(continued)
STEP 8 w TIMER-DELAY
START FEATURE:
YOU WILL SEE:
DO THIS:
PRESSOFF
(If unit is running)
PRESSTIMER/OFF
Note: To do this, the unit must be in the off position.
When first set, the display will show .5. (one half hour),to increasethe time up to 24 hours, go to step 9,
STEP 9 -- TO INCREASE
DELAYED START TIME: YOU WILL SEE TIME CHOSEN:
DO THIS:
PRESS
Note: Tap or hold the UParrow(A) to increase delayed star,_time by .5 hours (up to 10 hours), then in 1 hour increments up
to 24 hours. The control will count clownthe time remaining until start (8, 7.5, 7, etc.).
The unit will then come on in Cool and HI fan mode. The temperature maintained will-be the same asyou previsouly set. If you
want to change it, Press'Cool" or "PowerSaver Mode" pad, whichever you desire, then Up or Down arrows until the desired
temperature isindicated on the display. Pressingtimer "On/Off" or after 5 seconds, the control will automatically change the
display back to the hours remaining until the unit will start.
Switching unit on at any time will nullify this setting.
STEP 10 w SLEEP FEATURE: YOU WILL SEE:
DO THIS:
PRESSON/OFF
PAD
Note: In this "MODE" the selected temperature will increase by 2 degrees F 30 minutes after the mode is selected. The
temperature will then increase by another 2 degrees Fafter an additional 30 minutes. This new temperature will be maintained
for 7 hours before it returns tO the originally selected temperature. This ends the "Sleep" MODE and the unit will continue to
operate as originaUy programmed. The "Sleep" MODE program can be cancelled at any time during operation by pressing
_Sleep" MODE, "On/Off", "Fan Only" or the "V //X" buttons, on either the Control or the Remote. "Time Delay Stop"
limit reached will also end "sleep" MODE.
8