Filter
Top Products
Air Conditioner Features
(continued)
STEP 5 -- TO OPERATE
ON FAN ONLY:
DO THIS:
PRESSON
(if not running)
PRESS
FAN ONLY
YOU WILL SEE:
Note: Use this function only when cooling is not desired, such as for room air circulation or to exhaust stale air.(remember to
open the vent during this function, but keep it closed during cooling for maximum cooling efficiency.) You can choose any fan
speed you prefer.
During this function, the display will show the actual current temperature, not the set temperature as in the cooling mode.
STEP 6 -- TO USE THE POWER
SAVER FEATURE:
YOU WILL SEE:
DO THIS:
PRESS
POWERSAVER
Note: In this mode, when the compressor shuts off, the fan will continue to run for another 3 minutes, then shut off until
cooling isneeded, assensedby the room temperature control. During this time, it may come on for 3 minutes to sensewhether
cooling is needed, then it will go off for 10 minutes. It will continue doing this to sample the room air for as long asnecessary.
STEP 7 -- TIMER-DELAY
STOP FEATURE
YOU WILL SEE:
DO THIS:
PRESS
PRESS
Note: The unit must be running to make this setting.
Proceed as in step 9 to change the desired number of hours, before the control will time out and turn off.