Filter
Top Products
BUTTONHOLE MAKING
(Model 1947)
SETTINGS
Step 1. Special Stitch Modifier- Red Dot
Step 2. Special Stitch Dial- I_
Stitch Width Control- 4
9titch Length Control- Red Zone
Zigzag Presser Foot
Zigzag Needle Plate
1
Carefully mark the buttonhole length
on your garment. Mount the button-
hole guide onto the presser foot so
that rear edge of presser foot is at
the rear end of the guide, with upper
thread as shown. Place the fabric
with buttonhole marked, under the
buttonhole guide.
Without lowering the foot, let the
needle pierce the fabric at the be-
ginning of the buttonhole. Lower
presser foot.
Reproduction of the identical size
buttonholes isfacilitated with the aid
of the graduations on the left side of
the buttonhole guide.
These graduations are 1/8" apart.
Always start buttonhole with foot
positioned at rear end of the guide.
After first buttonhole is made, al-
ways stitch forward to point on front
of guide as with first buttonhole.
Graduations act as reference mark.
32