Filter
Top Products
REVERSE STITCH CONTROL
It is best to begin and end seams with a
few stitches taken in rpverse. This is
called back tacking. Back tacking
fastens the ends of the seams firmly and
prevents raveling.
When reverse stitching is needed, turn
the control clockwise and hold there
during sewing. The fabric will imme-
diately start feeding backwards and
seam will be fastened.
-SPECIAL STITCH MODIFi-
ER AND BUI"rONHOLE
CONTROL
This control gives you the means of
varying the stitches on the Special
Stitch Dial. When the pointer is turned
to the Red Dot, the machine sews
forward only. When the pointer is
turned to the White Dot, the forward
designs are varied by the machine
sewing in a forward and reverse manner.
Carefully read directions given in the
next section of the book in order to
accomplish the various stitches
correctly.
This control is also used in making
buttonholes (Model 1525 only). Detailed
instructions are given in the next section
of the book.
12