Filter
Top Products
1. KNOW YOUR MACHINE
Locate and identify the parts on your machine
After you have unpacked
your new machine, set it on a
flat, sturdy surface. Study
the following diagram so that
you will know the working
parts of your machine.
You may need to refer to
these diagram often while
reading the instructions in
this manual.
Extensiontable
Thread guide
Take-up lever
Threading channel
Top thread tension control
=O
A_essory box/extensi
Thread cutter
_/_ Needle clamp screw
** Presser foot release lever _ _ - Thread guide
** Thread cutter ./_ !'_ _
Presser foot thumb screw /'_ _ Q_ ""%_ ClotN;e_;
Presser foot _ _ _ _ _,,.=.,_/_ _. sc,ew hore
"\ \ __"_'_"_ _ _ooddo.,
Needle plate _._"He, _'_ _--'f --
Seam guide lines _ __----------__ Cornering guides
I
NOTE: A detailed drawing which shows the parts of the shuttle and bobbin is on page 11.
2