Filter
Top Products
_ IPlease payspecial attentionto these hazard alert boxes,and follow any instructionsl
Igiven. WARNING statementsalert you to suchdangersas fire, electricshock,burnsI
land personal injury. CAUTION statements alert you to such dangerous personalI
linjury and/or propertydamage, I
WARNING
Electrical Shock Hazard
Do not plug into the electrical sup-
ply until the assembly is complete.
Failure to do so could result In elec.
trical shock or injury.
Before assembling your vacuum cleaner, be
sure you have all the parts as shown in
PARTS AND FEATURES.
Attach stretch hose
end to nozzle as
shown.
HANDLE ASSEMBLY
Remove the screw located just below the
top edge of the back of the vacuum cleaner.
Screw
Position the handle as shown in the illustra-
tion below.
Slide the handle into the opening at the top
of the vacuum cleaner.
Handle
Screw
Hole
insert the screw so it passes through the
handle into the vacuum cleaner.
Begin to tighten the screw with your fingers.
It may be necessary to adjust the handle
slightly. Using a screwdriver, tighten the
screw.
Do not overtighten.
Overtightening could strip the
screw holes.
Do not operate the vacuum cleaner
without the screw in place,