Filter
Top Products
Review this table to find do-it-yourself solutions for minor performance problems. Any other
service needed should be performed by a Sears or other qualified service agent.
!
Disconnect electrical supply before performing maintenance to the
unit. Failure to do so could result in electrical shock or personal injury.
Vacuum cleaner
won't run.
Poor _ob of dirt
pick-up.
1. Unpluggedat wall outlet,
2. Tripped circuitbreaker/blownfuse
at householdservice panel.
1. Plug in firmly,select desiredsetting
on touchcontrol
2. Reset circuitbreaker or replacefuse.
1. Full or cloggeddust bag.
2. Wrong pile height setting.
3. Worn agitator.
4. Clogged nozzle or bag holder.
5. Clogged hose.
6. Hole in hose.
7. Broken/misplaced belt.
8. Hose not inserted fully.
9. Motor protectionsystem activated..
tO. Dirty filters.
1. Change bag.
2. Adjustsetting.
3. Replace agitator.
4. Check CLOG REMOVAL.
5. Check forclogs,
6. Replace hose,
7. Replac_fix be_t.
8. Insert hose fully.
9. Check for clogs.
tO. Change motorsafety filterand
exhaust filter.
Vacuum Cleaner picks 1. Wrong pileheight setting. 1. Adjust setting.
up moveable rugs or
pushes too hard.
Light won't work. 1. Burned outlight bulb. 1. Change lightbulb.
Agitator does not 1. Broken belt. 1. Replace belt.
turn.
2. Bare floor selectorin bare 2. Move selectortothe carpet setting.
floor setting.
3. Belt installed incorrectly. 3. Check BELT REPLACEMENT AND
AGITATORCLEANING.
Air flow restricted 1. Attachment use restrictsairflow. 1. Check ATTACHMENTS,
with attachment use.
Sound changes. 2. New carpet fuzz clogged air path. 2. Check CLOG REMOVAL and clean
hose.
Excessive noise as 1. Belt rubbingon carpet/bare floor 1. Pushselector all the way forward.
vacuum cleaner is shut selectorshaft.
off.
Dirt Sensor, some 1. Dirty optic cells. 1. Clean opticcells.
models, will not work.
22