Filter
Top Products
TO CLEAN AGITATOR
Note: In order to keep cleaning efficiency
high and to prevent damage to your vacuum
cleaner, THE AGITATOR MUST BE
CLEANED EVERYI"IME THE BELT IS
CHANGED.
The agitatormust be cleaned accordingto
the followingschedule:
Vacuum Use
HEAVY
(used daily)
MODERATE
(used 2-3 times/week)
Clean Aqitator
every week
every month
LIGHT
(used 1 time/week)
every 2 months
Remove anydirt or debris inthe beltpath
area or inthe agitatorarea.
Agitator Assembly
Carefully remove the brush end caps and
remove any string or debris located on the
agitator assembly or agitator shaft.
TO REPLACE BELT
Make sure that the carpet/bare floor selec-
tor is in the carpet position.
Motor
Shaft
Belt Carpet/Bare Floor
Pulley Belt Selector Shaft
Loop the new belt on the motor shaft.
BELT ROUTING
Correct Routing of Belt
(Selector In Carpet Position)
., ) BElt / _; )Carpet/Bare
Agit_at__t;rFlOor Pedal
Carpet/Bare Floor Shaft
Selector Shaft
Incorrect Routing of Belt
(Belt on Selector Shaft)
_-_" -_ - ,_,CarpeVBare
..I) Floor Pedal
Carpet/Bare Floor Shaft
Selector Shaft
Incorrect Routing of Belt
(Selector in Bare Floor Position)
/'"-\ CarpeVBare
I' '4/'} Floor Pedal
Agitator Belt Carpet/Bare Floor
Selector Shaft
17