Filter
Top Products
Alwaysfollow all safety precautionswhen
performingmaintenanceto the vacuum
cleaner.
Electrical Shock Or Personal Injury
Hazard
Disconnect electrical supply before
performing maintenance to the unit.
Failure to do so could result in elec-
trical shock or personal injury from
vacuum cleaner suddenly starting.
If the vacuum cleaner does not seem to
have adequate suction, first check if the
dust bag is full or if a filter is clogged. See
DUST BAG REPLACEMENT and FILTER
REPLACEMENT.
If the bag and filter areas are free of clogs,
check the hose area. Remove the lower end
of the stretch hose from the vacuum cleaner
by grasping the hose collar, twisting, and
pulling straight out.
Plug in the
vacuum cleaner
and turn it on.
Stretch the hose
Stretch to maximum
HoseIn length and then
and Out
allow the hose to
return to its
natural length.
Re-insert the hose into the opening on the
lower body from which it was removed.
Press firmly to assure connection.
Stretch
Hose
Hose
Collar
WARNING
If the bag and filter areas and the hose
areas are free of clogs, disconnect the hose
from the floor nozzle pipe and check the
nozzle pipe for clogging. Clean the agitator
according to the instructions in the AGITA-
TOR CLEANING section.
Return the vacuum cleaner to the upright
position before plugging into an electrical
outlet.
Turn off and unplug the vacuum cleaner.
Remove any visible clogs from the hose.
18