Filter
Top Products
Check motor safety filter frequently and
change when dirty.
! WARNING
Electrical Shock Hazard
Unplug power cord from electrical
outlet. Do not operate the vacuum
cleaner without the motor safety fil-
ter. Be sure the filter is dry and
properly installed to prevent motor
failure and/or electrical shock.
Remove the dust bag as outlined in the
DUST BAG REPLACEMENT section.
MOTOR SAFETY FILTER
(ELECTROSTATIC)
1. The filter must be
replaced when dirty.
It should be replaced Motor
regularly depending Safety
on use conditions. Filte
The filter CANNOT
be washed as it will
lose its dust
trapping ability.
Note: See PARTS
AND FEATURES for
motor safety filter number.
Motor
Safety
2. If the filter, locat-
ed in the bottom of
the bag cavity, is
dirty, remove it by
pulling forward and
out from under the
ribs.
3. Replace the
filter, smooth
(white) side up,
by sliding it back
into place under
the ribs in the bag
cavity.
Motor
);rN
Replace the bag as outlined in the DUST
BAG REPLACEMENT section.
16
EXHAUST FILTER
(HEPA)
I.,3w,=,o
Do not operate without exhaust
filter, Failure to due so may damage
the vacuum cleaner
The exhaust filter cartridge must be
replaced when dirty. It should be replaced
regularly depending on use conditions. The
filter CANNOT be washed as it will lose
its dust trapping ability.
Note: See PARTS AND FEATURES for the
exhaust filter number.
1. Slide the
exhaust filter
cover release
down.
2. Pull out on
exhaust filter
cover to remove
from bag cover.
Bag
cover
Exhaust Filter
Fil_
Bag
Exhaust
3. Removethe
exhaustfilter
cartridge from the
bag cove_
4. Replace the
exhaust filter
cartridge, carefully
positioning it so that it
fits into the bag cover.
The black edge of
the filter should be
facing away from
the operator. Push
only on filter cartridge
frame, not on filter itself.
ExhaustFilter _1/
eag 1
Cover---=
Exhaust
Filter --
5. Replace the
exhaust filter
cover and secure
the latch by
pushing it upward.