Filter
Top Products
Alwaysfollow all safety precautionswhen
cleaningand servicingthe Power-Matee.
Electrical Shock Or Personal Injury
Hazard
Disconnect electrical supply before
servicing or cleaning the uniL
Failure to do so could result in elec-
trical shock or personal Injury from
cleaner suddenly starting.
TO REMOVE BELT
1. Turn Power-
Mate® upside
down.
2. Unscrewthe
two (2) Power-
Mate® cover
screws.
3. Turn Power-
Mate ® right side
up. Press handle
release pedal
and lower the
swivel. Lift rear
_atches up.
Side
Latch Latches
4. TO remove cover,
grasp the sides and
pull out.
5. Lilt agitator
assembly out
and remove
worn belt.
End Cap
6. Check and clean end cap areas. See
AGITATOR ASSEMBLY for picture of
complete agitator assembly.
16