Filter
Top Products
WARNING
Do not operate with a clogged
EXHAUST FILTER
HEPA
The exhaustfilter cartridgemust be
replacedwhen dirty. Replace the filterwhen
the entire surface area is covered evenly.
The filter CANNOT be washed as it will
lose its dust trapping ability.
NOTE: See PARTS AND FEATURES for
exhaust filter number.
1. Pull out and
up on the
exhaust filter
cover to remove
from the vacu-
um and lay
aside.
3. Replace the
exhaust filter
cartridge.
Place the new
filter into the
vacuum with
the foam seal
facing
towards the
vacuum.
Tabs
Filter
2. Pullthe exhaust
tilterup and out
from the rear of
the vacuum.
Filter i
4. Replace the
exhaust filter
cover by placing
the two tabs on
the filter cover
into the slots on
the vacuum and
rotate into place
until it snaps
closed.
15