Filter
Top Products
Alwaysfollowal!safetyprecautionswhenperformingmaintenancetothePowerMate
,d_WARNING
Electrical Shock Or Personal Injury
Hazard
Always turn off and unplug vacuum
cleaner before performing maintenance
to the vacuum cleaner, Failure to do so
could result in electrical shock or
personal injury from vacuum cleaner
suddenly starting.
BELT CHANGING AND AGITATOR CLEANING
TO REMOVE BELT
'__ 1,.Remove the
,.,.., _ wandby pressing
thequick release
_'_ pedat and ,ifting
Wand up on the wand..
Quick
Ill Release
Pedal
Screws
2. Turn
PowerMate
upside down and
unscrew two (2)
PowerMate cover
screws,
Handle i = ,
Pedal----_%
3. Turn PowerMate
right side up,
4. Press handle
release pedal and
lower the swivel.
5. Lift rear latches
up
Rear
Latches
Side
Latch
End Cap
9. Check and clean end cap areas. See
AGITATOR ASSEMBLY for picture of
complete agitator assembly.
t9