Filter
Top Products
1, Unplugcordfromwalloutlet,DONOT
drip water onvacuum cleaner.
2, Cleanexteriorusinga clean,softcloth
that hasbeendippedin a solutionofmild
liquiddetergentandwater,thenwrungdry
Wipedryaftercleaning.
3oToreducestaticefectricityanddustbuild-
up,wipeoutersurfaceofvacuumcleaner
CAUTION
Do not use attachments if they are wet,
Attachments used in dirty areas, such
as under a refrigerator, should not be
used on other surfaces until they are
washed. They could leave marks,
and attachments _'_ _<_"'_
'Ii'_) _ }tli
Ak WARN IN G BAG1"RemoVecHANGiNGthebagsection.aSoutlined in the _i::
Electrical Shock Hazard
Unplug power cord from electrical
outlet. Do not operate the vacuum
cleaner without the motor safety filter.
Be sure the filter is dry and properly
installed to prevent motor failure and/or
electrical shock.
i ii i ,,11,,1111 i,;,,, i ......................
MOTOR SAFETY FILTER
ELECTROSTATIC
This filter must be replaced when dirty. It
should be replaced regularly depending on
use conditions.. The filter CANNOT be
washed as it will lose its dust trapping
ability.
NOTE'. See PARTS AND FEATURES for
Motor Safety Filter number
2, Lift the rubber
retainer and pull
out motor safety
filter as shown.
Rubber
Retainer
//////
4_ Replace the bag as outlined in the BAG
CHANGING section
3. Replace the filter,
white side out,
facing the dust bag,
by stiding ft back into
place under the ribs
in the bag cavily
Tuck filter in so that it
fits completely under
the rubber retainer,
15