Filter
Top Products
SUCTION CONTROL
The suction
control allows
you to change
the vacuum
suction for crease
different fabrics Suction Suction
and carpet
weights. Opening the control decreases
suction for draperies and lightweight rugs,
while closing the control increases suction
for upholsteries and carpets.
PERFORMANCE INDICATOR
When the
vacuum cleaner Indicator
is running with
normal airflow,
the light on the
performance
indicator is off. "--.
The light comes
on whenever the
airflow becomes blocked, If that occurs,
check the disposable dust bag, motor
safety filter and other possible clog
locations shown in HOW YOUR VACUUM
CLE-_NER WORKS.
To correct problem: See the TROUBLE-
SHOOTING table.
NOTE: The light may come on when using
certain attachments, due to reduced airflow
through attachment..
THERMAL PROTECTOR
This vacuum cleaner has a thermal
protector which automatically trips to protect
the vacuum cleaner from overheating. If a
clog prevents the normal flow of air to the
motor, the thermal protector turns the
motor off automatically. This allows the
motor to cool in order to prevent possible
damage to the vacuum cleaner_
To correct problem: Turn the vacuum
cleaner off and unplug the power cord
from the outlet to allow the vacuum
cleaner to cool and the thermal protector
to reset. Check for and remove clogs, if
necessary. Also check and replace any
clogged filters.Wait approximately
thirty (30) minutes and plug the vacuum
cleaner in and turn back on to see if the
motor protector has reset.
PowerMate STORAGE
The lower wand has
a "U" shaped flange
that slides into the
"U" shaped slot in
the canister
The flange ailows
the wands and
PowerMate to be
stored with the
canister to conserve
storage space. The canister must be
stored on end for this feature to be used
To attach the PowerMate, it must be in the
fiat position as shown in the illustration
Use the handle release pedal to place it in
this position
The wand will slip out of the slot as it is
lifted up for use and will slide into the slot as
it is lowered for storage.
STAIR GRIP
During normal operation while the canister is
in the horizontal position, the caster wheel
rotates freely 360 °.
The Stair Grip
feature aNows
the caster
wheel to lock in
position when
the canister is
rotated 25°
from horizontal
into a vertical position in order for the
canister to rest on stairs.
t3