Filter
Top Products
Review this table to find do-it-yourself solutions for minor performance problems. Any other
service needed should be performed by a Sears or other qualified service agent.
WARNING
Always turn off and unplug vacuum cleaner before performing maintenance to the
vacuum cleaner. Failure to do so could result in electrlcal shock or personal injury.
Vacuum cleaner won't
start.
Poor job of dirt
pick=up.
I. Unplugged at wall outlet.
2. Tripped circuit breaker/blown
fuse at household service panel.
I. Full or dogged dust bin.
2. Clogged airflow passages.
3. Dirty filters.
4. Hole in hose.
5. Dust bin open.
I. Plug in firmly, push ON/OFF switch
to on. (page 8)
2. Resetcircuit breaker or replace fuse.
I. Empty dust bin. (page 13)
2. Clear airflow passages. (page 12)
3. Change/Clean filters. (page 15 & 16)
4. Replacehose.
5. Closedustbinuntilreleasebuttonis
latched.(page13)
Vacuum cleaner starts I. Tripped thermal protector I. See PERFORMANCEFEATURES-
but shuts off. in canister. "Thermal Protector." (page 11)
Cord won't rewind. I. Dirty power cord. I. Clean the power cord.
2. Cord jammed. 2. Pull out cord and rewind. (page 8)
Vacuum Cleaner Help Line:
1=877=531=7321
8:OOam-5:OOpm EST,M-F
(U.S.A. and Canada)
]7