Filter
Top Products
CLEANING DUST BIN
1. Remove the dust
bin.
2. Slide the lever in
the direction of the
arrow to remove
the embedded dust.
3. Push the filter release button, open the
dust bin.
Filter
Release
Button
Filter
4. Take out the cleaning brush (included) to
clean the dust filter.
5. Push the dust filter cover release latch to
pull out dust filter cover.
DustFilter
CoverRelease
Latch
DoUSt_llter
6. Wash all
parts of the /III1\
dust bin. _
Z Allow filter to dry 24 hours before
putting back into vacuum cleaner.
NOTE: When the cleaning of the filter no
longer restores vacuum cleaner suction to
full power, replace the filter.
DO NOT operate without filter installed.
DO NOT wash in the dishwasher.
DO NOT install damp.
CAUTION
Do not attempt to dry with a hair
dryer or by placing in clothes dryer.
Hot air may cause the filters to warp.
It is not necessary to wash after each
use.
Dust Filter
Cover
8. Install the dust
filter cover along
the inside of
locating strip, and
make sure you
hear a "click."
9. Close the dust
bin and reattach
it as shown.
14