Filter
Top Products
REMOVING CLOGS
When the hose is clogged with dust,
remove it in the following manner:
1. Pull out the handle by turning the
removal ring in either direction.
2. Remove any clogs in the handle. Shake
the hose to remove any clogs.
3. Insert the handle in place and return the
ring to itsoriginal position.
4. Check the dust filter cover in the dust bin
and clean if necessary (See DUSTBIN
CLEANING, page 14).
5. Check the secondary filter and clean if
necessary (SeeSECONDARY FILTER
CLEANING, page 16).
6. Check exhaust filter and replace if
necessary. (See REPLACING EXHAUST
FILTER, page 15).
CAUTION
Product Damage Hazard
Do not usethe hose without the handle in
place. If the hose isusedwithout the
handle, the hose will bend excessively,
causing it to crack.
Ring
CLEANING EXTERIOR AND ATTACHMENTS
1.Turn off and unplug vacuum cleaner. DO
NOT drip water on vacuum cleaner.
2. To clean exterior, or to reduce static
electricity and dust build-up, wipe outer
surface of vacuum cleaner and attach-
ments. Use a clean, soft cloth that has
been dipped in a solution of mild liquid
detergent and water, then wrung dry. Wipe
dry after cleaning.
CAUTION
Do not use attachments if they are wet.
Attachments used in dirty areas, such as
under a refrigerator, should not be used
on other surfaces until they are washed.
They could leave marks.
12