Kenmore 116.23613 Vacuum Cleaner User Manual


 
!
'._ WARNING I
Fire and/or Electrical Shock Hazard
Do not operate with a clogged
exhaust filter or without the exhaust
filter or exhaust filter cover installed.
EXHAUST FILTER
HEPA
The exhaust filter cartridge must be
replaced when dirty. Replace the filter
when the entire surface area is covered
evenly. The filter CANNOT be washed as
it will lose its dust trapping ability,
NOTE: See PARTS AND FEATURES for
exhaust filter number.
1. Pull out and
up on the
exhaust filter
cover to remove
from the vacu-
um and lay
aside.
__.---:_-., Exhaust
JJ)l//l///l//l__,,,o,
3. Replace the
exhaust filter
cartridge.
Place the new
filter into the
vacuum with
the grey edge
facing
towards the
vacuum,
Tabs
2. Pull the exhaust
filter up and out
from the rear of
the vacuum.
Filter 1
4. Replace the
exhaust filter
cover by placing
the two tabs on
the filter cover
into the slots on
the vacuum and
rotate into place
until it snaps
closed.
iiiii!iiiilliiii iiiiiii_iiTiiii_!i_i_ii_ii iiiiiii!!iiiii!iii!iiiiiiii!iiiiii!lliiilJiiiJilii!!!!iiiiiliiiiiiiiiiiiiiiiiiiiii
Always follow all safety precautions when
cleaning and servicing the Power-Mate ®.
Electrical Shock Or Personal Injury
Hazard
Disconnect electrical supply before
servicing or cleaning the unit.
Failure to do so could result in elec-
trical shock or personal injury from
cleaner suddenly starting.
15