Filter
Top Products
POWER-MATE ®STORAGE
The lower wand
has a "U" shaped -'_
flange in the area 'i"
where the power
cord attaches. The
base has a "U"
shaped slot near
the front.
The flange allows
the wands and Power-Mate®to be stored
with the canister to conserve storage space.
The canister must be stored on end for this
feature to be used.
To attach the Power-Mate ®, it must be in the
flat position as shown in the illustration. Use
the handle release pedal to place it in this
position.
The wand will slip out of the slot as it is lifted
up for use and will slide into the slot as it is
lowered for storage.
THERMAL PROTECTOR
This vacuum has a thermal protector which
automatically trips to protect the vacuum
from overheating. The thermal protector
turns the motor off automatically to allow the
motor to coot in order to prevent possible
damage to the vacuum.
To reset: Tum off and unplug the vacuum
from the outlet to allow the vacuum to cool.
Check for and remove any clogs. Also
check and replace any clogged filters.
Wait approximately 50 minutes and plug
the vacuum in and turn back on to see if
the thermal protector has reset. In some
cases, the unit may suddenly restart. DO
NOT leave unattended.
ELECTRONIC BAG/HOSE
CHECK INDICATOR
Electronic The light comes
Bag/Hose on whenever
Check Indicator
the airflow
becomes
blocked, dust
bag needs
changing or
canister safety
filter needs
cleaning.
NOTE: The light may come on when using
certain attachments, due to reduced airflow
through attachment.
Refer to TROUBLESHOOTING
STAIR GRIP
During normal operation while the vacuum is
in the horizontal position, the caster wheel
rotates freely 360 °.
The Stair Grip feature
allows the caster
wheel to lock in ff'_%"
position when
the unit is
rotated 25 °
from horizontal
into a vertical
position in order
for the vacuum to rest
on stairs.
12