Filter
Top Products
FILL
Remove Tank-in-
Tank" System from
cleaner by pushing
down on tank latch
and tilting out.
Remove measure cap
from the rear of the
Clean Water Tank.
Pour 4 capfuls of
Kenmore ® Hard Floor
Concentrate Cleaner
into Clean Water Tank.
DO NOT USE PINE,
SOLVENT I OR WAX
BASED CLEANING
SOLUTIONS IN
CLEANER.
Fill remainder of Clean
_ eter Tank with warm
water up to the MAX
_7 / FILL line, Replace
measure cap on Clean
Water Tank,
F-
Replace Tank-in-Tank TM
System by inserting
bottom first and tilting
forward until tank
latch fastens.
VACUUM
9
With dry hands, plug
cord into properly
grounded electrical
outlet.
Step on Nozzle
Setting pedal If _,
necessary to _
switch from WET _,_
SCRUB & VAC to T
HARD FLOOR
DRY VAC.
Turn cleaner on by
moving power on/off
switch from OFF to
ON.
Step on Handle
Release pedal to put
into cleaning position.
Slide Brush On/Off
switch to the OFF
position if necessary.
Operate cleaner to dry
vacuum the entire
hard surface area.