![](http://pdfasset.owneriq.net/f/84/f84a4ae5-9230-4be8-b515-ebb744c4ba28/f84a4ae5-9230-4be8-b515-ebb744c4ba28-bgf.png)
Replacefilter by
graspingangledtopof
filter and turning
clockwise to lock onto
fllter/fioat assembly.
\
Return filter/float
assembly to Dirty
Water Tank. To ensure
proper fit, make sure
the arrow on the filter/
float assembly lines
up with the Align Filter
Front arrow on Tank-
in-Tank TM.
TRANSPORTING
ALL SURFACE FLOOR
CLEANER
• Put handle in locked position.
• Turn unit off.
• Store cord.
• Tilt unit back on rear wheels and push
forward. NOTE: Use the carry handle to
transport the unit up and down stairs.
CAUTION
Do not store the All Surface
Floor Cleaner in garage or area
where unit could freeeze.
NOTE: Do not store unit with any
liquid in either the Clean Water Tank or
Dirty Water Tank.
STORING ALL
SURFACE FLOOR
CLEANER
BEFORE STORING ALL SURFACE
FLOOR CLEANER:
• Empty and rinse Tank-in-Tank" System
• Clean filter
• Replace Tank-in-Tank" System
• Wrap cord around quick cord release
and lower cord wrap
• Make sure that unit is fully dry prior to
storing,
15