Filter
Top Products
Manual Method
Top thread tension control
O, 2 4 .6,8
See page 17.
Presser foot
I II
Stitch selector
t h control
-5
J
1. a. Carefully mark the buttonhole length on
your garment.
b. Insert it under the presser foot with the
left side of buttonhole under the needle.
2. a. Make sure the needle swings to the
right and pierce the fabric at point A.
b. Stitch to the end of the marking and
stop with the needle in the fabric on the
right side of stitching (point B).
Q
Diameter
of button
plus 1/8".
0
®
45