Filter
Top Products
8
Using Your Kambrook Tower Fan
Before first use
Remove your tower fan from its carton
and associated protective wrapping.
Unwind the cord to its full length and
remove any protective cardboard
or foam that may have been used
to minimise transportation damage.
Place the tower fan on a firm, level
surface in a stable upright position.
Visually inspect the air inlet and
outlets to ensure no foreign material is
blocking these areas.
Assembling Your Kambrook
Arctic Tower Fan
Toassemblethebasestand;
1. The tower fan base stand comes
in two separate pieces that must
be fixed together before being
fitted to the fan body.
2. To assemble the base stand,
place the tower fan body on its
side. Holding base stand piece
(a) and (b) align the power cord
with the centre of the round cord
opening of base stand piece (a)
(see Fig.1).
Fig. 1
3. Position base stand piece (b)
onto base stand piece (a) by
aligning the four locating posts.
Firmly push down base stand
piece (b) until the base stands are
secured into place (see Fig.2).
Fig. 2
4. Thread the power cord through
the circle cord opening. Once
power cord is pulled through,
align the holes on the base
stands with the four screw holes
located at the bottom of the
tower fan body (see Fig.3).
Fig. 3