Filter
Top Products
7
Setting the fan speed
Pressing the ‘SPEED’ button
once will set the tower fan into
LOW speed setting.
Pressing the ‘SPEED’ button
twice will set the tower fan
into MEDIUM speed setting.
The speed indicator bar on
the control panel will flash
continuously on this cycle.
Pressing the ‘SPEED’ button
three times will set the tower
fan into HIGH speed setting.
The speed indicator bar on
the control panel will flash
continuously on this cycle.
Turning the tower fan on
Plug the cord into a 230V or
240V power point and
switch on.
Once the power outlet
is switched on, this will
automatically allow the LED
screen to display to current
room temperature.
To start the tower fan, turn the
tower fan on by pressing the
‘POWER’ button once; the unit
will be in NORMAL fan mode.
Quick Start Guide
Setting the fan mode Setting the osciillation
Once the tower fan is switched
on and the the ‘POWER’button
is selected; the unit will be in
NORMAL fan mode.
Pressing the ‘MODE’ button
once will set the tower fan
into NATURE mode.
Pressing the ‘MODE’ button
twice will set the tower fan into
REDUCTION mode. To set the
tower fan back to NORMAL
mode, press the ‘MODE’ button
again.
Pressing the ‘SWING’ button
will allow the tower fan to
oscillate side to side. To stop the
oscillation, press the ‘SWING’
button again.