Kambrook KCE340 Electric Heater User Manual


 
8
Turning the heater on
Plug the cord into a 230V or 240V
power point and switch on.
Switch the heater ON using
the main power ‘ON/OFF’
switch located at the base
of the heater.
Press the ‘POWER’ button to
activate heating. The heater
will be in HIGH heat mode
(2000W) and the current room
temperature will appear on
the LCD screen.
Quick Start Guide
Setting the heating mode
Pressing the ‘MODE’ button
once will set the heater into
AUTO mode. AUTO mode
allows you to adjust the
temperature settings to suit
the desired temperature.
Pressing the ‘MODE’ button
twice will set the heater into
FAN mode, and the LCD screen
will display the current room
temperature. FAN mode is for
fan-only operation with no
output of heat.
Pressing the ‘MODE’ button
three times will set the heater
into LOW heat mode (1000W).
Setting the variable temperature Setting the oscillation
To use the variable temperature,
press the ‘MODE’ button once to
set the heater into AUTO mode.
Set the desired temperature by
adjusting the ‘TEMPERATURE’
(+) to increase the temperature
and (-) to decrease the
temperature. The heater will
now cut in and out to maintain
desired set temperature.
Pressing the ‘SWING’ button will
allow the heater to oscillate
side to side. To stop the
oscillation, press the ‘SWING’
button again.
KCE340_IB_A12.indd 8 2/11/12 11:37 AM