Filter
Top Products
66
SECTION VII
Maintenance
Proper machine cleaning and oiling are essential to
ensure maximum machine performance.
Cleaning and Oiling
Unplug the machine from the electrical outlet. Open the
front and side covers.
Remove the presser foot by pushing the lever on the
back of the foot holder.
Remove the needle plate by pushing down its release
lever (a).
Disengage the upper knife.
Use the brush to remove all lint and fiber accumulation.
Apply a drop of oil to the points (b) as shown. Oiling
should be performed for every 8 hours of actual sewing
operation.
Reattach the needle plate by pressing down on its front
section until it snaps onto the needle plate pin (c).
To reattach the presser foot, place the foot underneath
the foot holder and lower the presser bar. The foot will
snap back into place.
(a)
(c)
(b)