Filter
Top Products
24
3-in-1 TV STAND
www.insigniaproducts.com
Step 3: Attach the mounting frame to the swivel bracket
1 Hold the flat side of the mounting frame (P) against the swivel bracket (N), aligning the holes. Make sure that
the two recessed holes on mounting frame (P) are at the bottom.
2 Insert a 3/4" bolt (T) through a flat washer (Y) and then through the hole connecting mounting frame (P) with
swiveling bracket (N).
3 Repeat this for the three remaining holes joining the swiveling bracket (N) to the mounting frame (P).
4 Place a second flat washer (Y), and a lock washer (X) onto the end of the threaded bolt, then secure with a hex
nut (Z).
5 Securely tighten with the provided open wrench and Allen wrench.
You’ll need:
T (4)
X (4)
Y (8) Z (4)
DD (1)
EE (1)
NS-3IN1MT50C-NS-3IN1MT50C-C_14-0478_MAN_V2_ENG.fm Page 24 Wednesday, May 7, 2014 1:33 PM