Filter
Top Products
23
3-in-1 TV STAND
www.insigniaproducts.com
Step 2: Attach the swivel bracket
1 Align the swivel bracket (N) at the height you would like the center of your TV to be.
2 Insert a 2¼” bolt (W) through a lock washer (X) and a flat washer (Y) and then through the swiveling bracket (N)
and the drilled hole on the long rear support (D).
3 Place a second flat washer (Y), and a lock washer (X) onto the end of the threaded bolt, then secure with a hex
nut (Z).
4 Repeat this procedure for the three remaining holes joining the swiveling bracket (N) to the long rear support
(D).
5 Securely tighten with the provided open wrench and Allen wrench.
You’ll need:
W (4)
X (8)
Y (8)
Z (4)
DD (1)
EE (1)
NS-3IN1MT50C-NS-3IN1MT50C-C_14-0478_MAN_V2_ENG.fm Page 23 Wednesday, May 7, 2014 1:33 PM