Ingersoll-Rand 66610X-x-c Heat Pump User Manual


 
Page 4 of 8 66610X-X-C (en)66610X-X-C (en)
PARTS LIST / 66610X-X-C FLUID SECTION
637119 - XX - C Fluid Section Service Kits include: BALLS (see Ball Option, refer to -XX in chart below), DIAPHRAGMS (see Diaphragm Option, refer to -XX in chart below),
packet, plus items: 2, 3, 9 and 19 and 93706-1 Key-Lube grease.
SEAT OPTIONS
6661XX-XXX-C
BALL OPTIONS 6661XX-XXX-C
“21”
“22”
(1-” dia.) (Service Kit - XX)
-XXX Seat Qty [Mtl] -XXX Ball Qty [Mtl] -XXX Ball Qty [Mtl]
-1XX 92008-1 (4) [A] -X1X 90532-1 (4) [N] -X8X 90532-8 (4) [U]
-2XX 90428-1 (4) [SS] -X2X 90532-2 (4) [B] -XAX 90948 (4) [SS]
-3XX 92926 (4) [P] -X3X 90532-3 (4) [V] -XCX 90532-C (4) [H]
-4XX 92941 (4) [K] -X4X 90532-4 (4) [T] -XEX 90532-A (4) [Sp]
-5XX 95675-1 (4) [C] -X5X 90532-5 (4) [E]
-8XX 93367-1 (4) [SH] -X6X 90532-6 (4) [D]
DIAPHRAGM OPTIONS 66610X-XXX-C
SERVICE KIT
“7”
“8”
“3”
“19”
-XX = (Ball)
"O” Ring
1/16" x 5/8" o.d.
"O” Ring
3/32" x 1-9/16" o.d.
-XXX -XX = (Diaphragm) Diaphragm [Qty] [Mtl] Diaphragm [Qty] [Mtl] [Qty] [Mtl] [Qty] [Mtl]
-XX1 637119-X1-C 90533-1 (2) [N] ---- --- --- Y325-14 (4) [B] Y325-126 (4) [B]
-XX2 637119-X2-C 90533-2 (2) [B] ---- --- --- Y325-14 (4) [B] Y325-126 (4) [B]
-XX3 637119-X3-C 90533-3 (2) [V] ---- --- --- Y328-14 (4) [T] Y327-126 (4) [V]
-XX4 637119-X4-C 93459-4 (2) [T] 92973-B (2) [SP] Y328-14 (4) [T] Y328-126 (4) [T]
-XX5 637119-X5-C 90533-5 (2) [E] ---- --- --- Y328-14 (4) [T] 90534 (4) [E]
-XX6 48495964 48490056 (2) [CP] ---- --- --- ------ ---- --- Y328-126 (4) [T]
-XX9 637119-X9-C 90533-9 (2) [H] ---- --- --- Y328-14 (4) [T] Y327-126 (4) [V]
-XXB 637119-XB-C 90533-B (2) [SP] ---- --- --- Y328-14 (4) [T] 90534 (4) [E]
MAINFOLD / FLUID CAP MATERIAL OPTIONS 6661XX-XXX-C
Aluminum
6661X0-X, 6661XA-X
Stainless Steel
6661X1-, 1X9-, 1XB-, 1XD-
Cast Iron
6661X2-X, 6661XC-X
N.P.T.F BSP N.P.T.F BSP N.P.T.F. BSP
Item Description
(Size)
Qty Part No. Part No. [Mtl] Part No. Part No. [Mtl] Part No. Part No. [Mtl]
15 Fluid Cap (2) 94945 94945 [A] 91045 91405 [SS] 94277 94277 [CI]
16 Manifold (6661X0,1X1,1X2, 1XA,1XB,1XC) (2) 92001 92001-1 [A] 91044 91044-1 [SS] 94278 94278-1 [CI]
17 Outlet Mainfold (6661X9-, 661XD- only) (2)
----- ----- ---
92846 92846-1 [SS]
----- ----- ---
18 Inlet Mainfold (6661X9-, 661XD- only) (2)
----- ----- ---
92847 92847-1 [SS]
----- ----- ---
23 Spring (6661X9-, 6661XD- only) (2)
----- ----- ---
22155 22155 [SS]
----- ----- ---
HARDWARE OPTIONS 6661XX-XXX-C
Item
Description
(size) Qty
Carbon Steel
6661X
0-, 1-, 2-, 9-
Part No. [Mtl]
Stainless Steel
6661X
A
-,
B-,
C-, D-,
Part No. [Mtl]
5 Washer - Air Side (3-5/8" o.d.) (2) 93441-2 (C) 93441-1 [SS]
24 Washer - models 66619X9 and 6661XD only (5/16") (8) Y13-5-C (C) Y13-5-T [SS]
26 Bolt (5/16" -18 x1") (8) Y6-55-C (C) Y6-55-T [SS]
29 Nut (5/16" -18) (16) Y12-5-C (C) Y12-5-S [SS]
MATERIAL CODE
[A] = Aluminum
[B] = Nitrile
[C] = Carbon Steel
[CI] = Cast Iron
[Co] = Copper
[CP] = Composite PTFE
[D] = Acetal
[E] = E.P.R.
[H] = Hytrel
[K] = P.V.D.F. (Kynar)
[N] = Neoprene
[P] = Polypropylene
[SP]= Santoprene
[SH] = Hard Stainless Steel
[SS] = Stainless Steel
[T] = PTFE
[V] = Viton
637167
ABRASION RESISTANT
CONVERSION KIT INCLUDE
"21" Seat 93367-1 (4)
"22" Ball 90532-8 (4)
COMMON PARTS
Item Description
(size in inches)
Qty Part No. [Mtl]
1 Rod
(6661XX-XX6-C)
(1) 48489600 [C]
(other models)
(1) 98724-1 [C]
2 ‘‘O” Ring
(3/32” x 3/4” o.d.)
(1) Y330-113 [B]
6 Washer - Fluid Side
*
(2) 93441-1 [SS]
models 661X0 and 6661X2 only
(2) 93441-2 [C]
Item Description
(Size in inches)
Qty Part No. [Mtl]
9 Washer
(0.505” i.d.)
*
(2)
93189-1 [SS]
14 Screw
(1/2 " 20 x 1")
*
(2)
Y5-85-T [SS]
30 Shim
(6661XX-XX6-C)
(
) 48499362
#
[C]
43 Ground Lug
(see page 7)
(1) 93004 [Co]
Service Note: Fluid Section Service Kits also include part no. 93131 (5) “O” rings for repair of “-B” (pre - 8/89) models.
Service Note: Part no. 98930-T installation tool is available separately for use with items 1 and 2.
“Smart Parts”, keep these items on hand in addition to the service kits for fast repair and reduction of down time.
*
For 6661XX-XX6-C, on the uid side, washer (6), (9) and screw (14) are not needed.
The quantity is between 0 to 5, shims are not shown in the exploded view.
# For service, shim pack 48499222 can be purchased. Refer to service kits manual 48495949 for details.