Filter
Top Products
651616-XPAGE 2 OF 8
OPERATING AND SAFETY PRECAUTIONS
Z Read andheed all Warnings,Cautions and Safety Precautions
before operating.
Z UseonlygenuineAROreplacementpartstoassurecompatible
pressure rating and longest service life.
WARNING
ANCHORTHE LIFTBASESECURELYTO ACON-
CRETEFLOOR.Animproperlysecuredliftcouldbeunsafe.Do
notattempttousetheliftuntilallpossiblemeasureshavebeen
taken to insurethat the lift has been properlyinstalled and the
base hasbeen secured. Itis the dutyof the installerto provide an-
chor bolts / studs (not included) and for them to be securely em-
bedded in concrete which is more than 2’’ thick.
Shock hazard.
Striking electrical
fixtures can cause
injury.
Keep the area
overhead clear of
electrical devices.
WARNING
PREVENTELECTRICSHOCK.Becertainthearea
above the lift is clear of electrical fixtures, devices and wiring.
Examinetheworkingareaandtakenecessaryactiontoassureade-
quate clearance forthe liftand pumpassembly toraise to thefullest
limit and function properly.
Keep hands clear
when aligning with
container.
Pinch hazard.
Follower can descend
quickly causing injury.
WARNING
PINCH HAZARD. Follower can descend quickly,
causinginjury.Keephandsclearwhenaligningwithcontainer.
In the raisingand lowering function, the liftcould get hung upor the
descentcouldbetemporarilyrestricted.Theliftcould,insomesitua-
tions,dropsuddenlyandbehazardous.Ifthefollowerplatedoesnot
enter the drum properly, DO NOT ATTEMPT TO REPOSITION IT
WITHYOURHANDS;releasethe downwardpressure,raise thelift,
realign the drum and restart.
WARNING
STANDCLEAR. Whenraisingor loweringthe lift,
keep clear and operate from a safe position.
Do not exceed maxi-
mum inlet air pressure.
Hazardous pressure.
Can result in injury or
property damage.
WARNING
HAZARDOUS PRESSURE. Do not exceed maxi-
muminletair pressure of150psi(10.3bar).Operatinglift athigh-
er pressure may cause lift damage and / or personal injury and / or
property damage. Donot service or cleanpump, hoses or dispens-
ing valve while the system is pressurized.
WARNING
DO NOT EXCEED DRUM PRESSURE LIMITS.
Know thepressure limitationsofthe drumand regulatethe airpres-
sure within safe limits when supplying air to the follower plate.
CAUTION
Be certain all operators of this equipment have
been trainedfor safeworkingpractices, understand it’slimita-
tions and wear their safety goggles / equipment as required.
OPTIONAL EQUIPMENT
67133 Drum Hold Down Bracket Kit
Includes (2 of each): Brackets, Clamps,
Screws, Nuts.
Pump Stabilizing Bracket Kit (includes hardware)
H Filter-Regulator-Lubricators
4-1/4’’, 6-1/4’’ - 65940 HD FRL w / Bracket
8’’ - 651730 HD FRL w / Bracket
10’’, 12’’ - 651729 HD FRL w / Bracket
H Polyethylene Follower Plate seal
protector sheets
91364-10 Pkg of 10 - 20’’ dia. (5 Gal. drum)
91363-10 Pkg of 10 - 32’’ dia. (55 Gal. drum)
66353-1 for 8’’, 10’’, 12” Motors
66354-1 for 3-1/4’’, 4-1/4’’, 6’’ Motors
67136 Adapter Kit
67136 Adapter Kit Assembly
Y17-50-S Pipe Plug (2) ~
~ Included in 67136 Adapter Kit Assembly.