Filter
Top Products
Thermostat Reset Upgrade Kit Installation Instructions
© 2005, IMI Cornelius Inc. - 5 - Publication Number: 629088480INS
14. Remove contactor from box and connect main power and contactor harnesses, as shown.
IMPORTANT – Main power MUST be on same side as flag terminals already attached to contactor
(see photo). Remount contactor in box.
15. Feed the remaining 4 wires (2 red, 2
orange) through hole.
Snap bushing inserted.
Harness from
contactor box.
Main power lead
harness.
Contactor
harness
here.
Main power
harness
here.
Remount contactor in the box by
locating this screw than turn the
contactor to locate the other screw.
Feed these wires through the hole.