Filter
Top Products
[7]
44805 10/23/2008
[a]
[a][a]
ENGLISH
ELECTRICAL BOX
• Grounded
• Circuit breaker protected with 7A
overcurrent protection [a].
NOTE: If the breaker trips, unplug all
cords and hit the reset button on the side
of the box.
ADJUSTING HEIGHT OF FAN
• This fan has a special height
adjustment feature allowing it to
be placed near a standard height
window.
1. Place you foot on the carrying ledge.
2. Pull in on thumb levers.
3. Raise fan assembly slightly and
release levers so they will locate in
the next hole.
4. Slowly raise or lower the fan to the
desired position.
• The fan section can be raised and
locked approx. 9" and 16" from the
load carrying position.
ADJUSTING
TILT RESISTANCE
1. The cover of the electrical box holds
the small allen wrench needed for
this operation.
2. To adjust tilt resistance locate
fasteners on both sides of the fans
[a].
• To increase tilt resistance - turn
clockwise.
• To decrease tilt resistance - turn
counter-clockwise.
OPERATION