Filter
Top Products
[6]
44805 10/23/2008
[a][c]
[a]
[a]
[a]
[b]
[a]
[b]
ASSEMBLY
ENGLISH
7. Fasten Small Bolt [a] and Nylon Nut [b]
using Small Allen Wrench [c] (included)
and an adjustable wrench or pliers.
8. Store the Small Allen Wrench [a] in the
cover of the electrical box when not in
use. This wrench can be used to adjust
the tilt resistance (see page 7).
9. Lower the Fan Assembly [a] onto the
Tubes [b] of the base assembly. Slide
down until it stops.
10. Pull on Thumb Levers [a] to lower the
Fan Assembly into the lowest / load
carrying position.
11. When not in use, please store cord
on the back of the fan assembly as
shown above.