Filter
Top Products
42733-01 04/26/2007 9
ENGLISH
17. Align the three keyhole slots in
the Back Grille with the three re-
maining Grille Mounting Screws
in the Motor Face, and place the
Back Grille onto the Motor Face,
ensuring that the Grille Mount-
ing Screw washers are between
the screw head and the Back
Grille. If necessary, loosen the
three remaining Grille Mounting
Screws. See Figure 7.
18. Rotate the Back Grille clockwise
to situate the screws in the nar-
row ends of the keyhole slots.
19. Reinstall and tighten the Up-
per Left Grille Mounting Screw
and tighten the remaing three
remaining Grille Mounting
Screws.
FIGURE 7